TestValid D-PST-OE-23 dumps & Dell Storage Sure Practice with 146 Questions
New D-PST-OE-23 Exam Questions| Real D-PST-OE-23 Dumps
NEW QUESTION # 58
How often are PowerStore file system capacity metrics collected?
- A. 15 minutes
- B. 5 minutes
- C. 10 minutes
- D. 1 minute
Answer: B
NEW QUESTION # 59
Which of the following is a primary use case for configuring NDMP backup support in PowerStore?
- A. To improve the performance of live data access
- B. To facilitate asynchronous replication between clusters
- C. To enable direct backup of file storage data to tape or secondary storage
- D. To encrypt file data for secure transmission over the network
Answer: C
NEW QUESTION # 60
What are the implications of performing a snapshot restore operation in PowerStore? Select all that apply.
- A. Immediate availability of restored data
- B. Increased storage utilization due to data duplication
- C. Potential data loss for changes made after the snapshot was taken
- D. Temporary loss of access to the original volume during restoration
Answer: A,C
NEW QUESTION # 61
What is the default performance policy for volumes in PowerStore Thin Clone?
- A. Ultra Performance
- B. Medium
- C. Low
- D. High
Answer: B
NEW QUESTION # 62
For optimal performance, how should ESXi hosts be connected to PowerStore storage?
- A. Through a single active network interface
- B. Using multipathing software
- C. Directly to the PowerStore appliance without a switch
- D. Via a VPN tunnel for security
Answer: B
NEW QUESTION # 63
What is a requirement for configuring intercluster virtual machine migration (vMotion) in a PowerStore environment?
- A. A direct physical connection between the source and target PowerStore appliances.
- B. Both source and target clusters must have identical PowerStore models.
- C. Shared storage accessible by both the source and target ESXi hosts.
- D. The virtual machines must be powered off before migration.
Answer: C
NEW QUESTION # 64
An administrator is attempting to remove a remote replication session for a test volume.
- The administrator selects the test volume from the Storage tab.
- From the More Actions dropdown list, the Unassign Protection Policy is selected.
- In the Unassign Protection Policy confirmation window, the administrator clicks the Unassign button and receives a Modify Volume error.
What is the cause of the error
- A. Operation was performed from the replication destination.
- B. Replication session was not paused before the protection policy was unassigned.
- C. Replication rule was not deleted from the protection policy.
- D. Protection policy replication rule RPO value was not set to zero.
Answer: A
NEW QUESTION # 65
Which features are important when configuring VMware storage policies on PowerStore? Select all that apply.
- A. Storage Policy-Based Management (SPBM)
- B. Quality of Service (QoS) settings
- C. VM encryption settings
- D. Data deduplication and compression
Answer: A,B,D
NEW QUESTION # 66
Which of the following is a requirement for PowerStore Migration?
- A. External USB drive for temporary data storage
- B. Compatible source storage system
- C. Manual data backup before initiation
- D. A direct internet connection for cloud-based data sources
Answer: B
NEW QUESTION # 67
When will PowerStore require a restore operation be performed instead of a refresh operation?
- A. When refreshing a volume from a thin clone snapshot.
- B. When refreshing a volume from a volume snapshot.
- C. When refreshing a thin clone from a volume snapshot.
- D. When refreshing a thin clone from a peer thin clone snapshot.
Answer: B
NEW QUESTION # 68
What is the role of the PowerStore system on a supported NDMP backup deployment?
- A. Primary storage
- B. Storage node
- C. Media server
- D. Secondary storage
Answer: A
NEW QUESTION # 69
What is the minimum-security level required to create a PowerStore account with the ability to block user accounts?
- A. Storage Administrator
- B. Operator
- C. Security Administrator
- D. VMware Administrator
Answer: C
NEW QUESTION # 70
Which protocol is essential for the remote replication of file storage resources in PowerStore?
- A. HTTP
- B. Rsync
- C. SMTP
- D. NFS
Answer: B
NEW QUESTION # 71
How often should protection policies on block storage resources be reviewed and updated in PowerStore?
- A. Once a year
- B. According to the data lifecycle management policy
- C. Never, once set they should not be changed
- D. After every system update
Answer: B
NEW QUESTION # 72
What impact does enabling data encryption have on PowerStore block storage performance?
- A. No impact, as encryption is hardware-accelerated
- B. Significantly improves performance by optimizing data layout
- C. Reduces storage capacity requirements
- D. Can introduce a minimal performance overhead
Answer: D
NEW QUESTION # 73
When configuring a host in PowerStore, which parameter is essential for ensuring proper connectivity?
- A. WWN or iQN
- B. IP Address
- C. Hostname
- D. MAC Address
Answer: A
NEW QUESTION # 74
Which PowerStore model has the CoreOS installed on bare metal hardware?
- A. PowerStore T only
- B. PowerStore X only
- C. CoreOS can be installed on external servers connected to any PowerStore model.
- D. PowerStore T and X
Answer: A
NEW QUESTION # 75
What is the recommended number of paths per volume per Fibre Channel host when attaching to a PowerStore appliance?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 76
During implementation of an iSCSI PowerStore X, the System Administrator is setting up performance policies on externally connected VMFS volumes. They create three DataStores with a high, medium, and low performance policy.
Testing is showing that the VM on the low performance DataStore is running at roughly the same performance as the VM on the high performance DataStore.
Both are performing well, but why is the System administrator seeing the same performance?
- A. PowerStore X tiered storage performance has not been turned on in system settings
- B. PowerStore X policies are QoS based and only affect performance during contention.
- C. PowerStore X QoS-based performance policies can only be applied to vVols.
- D. PowerStore X tiered storage performance policies can only be applied to workloads on the PowerStore X host.
Answer: B
NEW QUESTION # 77
Which technique is essential for proactive monitoring of PowerStore block storage resources?
- A. Conducting annual performance reviews
- B. Relying on user feedback for performance issues
- C. Utilizing built-in analytics and reporting tools
- D. Periodic manual inspection of physical storage devices
Answer: C
NEW QUESTION # 78
......
D-PST-OE-23 Braindumps – D-PST-OE-23 Questions to Get Better Grades: https://passtorrent.testvalid.com/D-PST-OE-23-valid-exam-test.html