Simulation for the App version
As is known to all, simulation plays an important role in the final results of the customers. The simulation opportunity offered by the App version of our 920-270 original questions: Nortel WLAN 2300 Rls. 7.0 Planning and Engineering of course also is of great significance for those who are not so familiar with the environment of the test. By simulation of 920-270 answers real questions, we refer to simulate the environment, procedure and contents for the test so that the customers can be acquainted with what will happen in the real test. As it is highly similar to the Nortel 920-270 real exam, customers can explore the most suitable way to answer the questions in the test. For instance, they can decide what kind of questions of 920-270 exam cram to do first and what to do in the end. In this way, they can make full use of the time to answer questions that they are more likely to do one hundred percent correct.
I don't know whether you have heard about our 920-270 original questions: Nortel WLAN 2300 Rls. 7.0 Planning and Engineering. Nevertheless, I still want to make a brief introduction about our 920-270 answers real questions for the sake of your own benefits. Do you think I am a little bit pretentious? Well, I would like to extend my sincere gratitude if you do not make such an early conclusion. Upon reading the following text, all your doubts will be dissipated.
Many benefits for the PDF version
Once you have chosen the PDF version for our 920-270 original questions: Nortel WLAN 2300 Rls. 7.0 Planning and Engineering, you will enjoy the continuous surprise from then on. First and foremost, there is demo in the PDF version and customers are allowed to download it to have the pre-trying experience. Therefore, the customers have a better understanding about our 920-270 answers real questions ahead of time so that the customers can decide if our exam files are suitable or not. Secondly, you can print the PDF version of our 920-270 exam prep: Nortel WLAN 2300 Rls. 7.0 Planning and Engineering into the paper version so that the customers can make notes for their later review. Thirdly, the PDF version of 920-270 original questions: Nortel WLAN 2300 Rls. 7.0 Planning and Engineering is convenient to look through, which can greatly benefit our customers.
Instant Download 920-270 Exam Braindumps: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
High pass rate
According to the statistics recorded, the general pass rate for our 920-270 original questions: Nortel WLAN 2300 Rls. 7.0 Planning and Engineering is 98% to 99%, far beyond that of other exam files. As a result, our 920-270 answers real questions gradually win a place in the study materials providing. People who have used our 920-270 exam bootcamp can pass the exam much easier than others, which is the essential reason why more and more people turn to the help from our 920-270 PDF VCE. As far as the high pass rate is concerned, it really acts as a driving force for those who are keen on the success in the exams. As our 920-270 exam cram are bestowed with a high pass rate, the customers using our exam materials will have more confidence to get good grades in the exams, which in turn encourage them to have a better performance.
Nortel 920-270 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Wireless Security Design | - Authentication mechanisms
|
| WLAN Planning Fundamentals | - Site survey and RF coverage design
|
| WLAN Architecture (WLAN 2300 Series) | - WLAN Security Switch (WSS) deployment
|
| Quality of Service (QoS) and Voice over WLAN | - Traffic prioritization
|
| WLAN Management and Deployment Tools | - WLAN Management System (WMS)
|
Nortel WLAN 2300 Rls. 7.0 Planning and Engineering Sample Questions:
A customer is using a SpectraLink Voice Priority (SVP) in the Telephony Manager 2245 on their network. What must be done to enable SVP to provide QoS for Voice over IP?
- A. The TFTP Server must be configured for supporting multiple TFTP sessions.
- B. With a DCHP Server, it must have the static IP address Telephony Manager 2245 configured on it.
- C. Wi-Fi Multimedia (WMM) capabilities should be disabled.
- D. A pool of alias IP addresses must be configured first on the Telephony Manager 2245.
Correct Answer: C 🗳️
A site survey for a Wireless LAN site has been completed. Given the configuration and building materials within the facility, it is expected that a high number of access points (AP) in close proximity will be required to ensure adequate coverage. The design team is concerned with channel overlap due to the number of AP required and has determined that
802.11a will be used. Which rationale supports this choice?
- A. 802.11a covers more distance than 802.11b and requires fewer APs.
- B. 802.11a uses non-overlapping channels while 802.11b does not.
- C. 802.11a has more non-overlapping channels than 802.11b.
- D. 802.11a is better able to penetrate dense building materials than 802.11b.
Correct Answer: C 🗳️
A large department store is considering a VoWIP solution to be used in all 20 store locations. The plan calls for at least one employee from each department to carry a wireless handset for voice communications and a data link to a centralized inventory database for price lookup and inventory checks. Currently the company has a robust wired network in place at all of its locations including large data links between them. How should the design specialist approach the site-to-site voice trunking solution?
- A. Convince the customer to keep a wired telephone system in place at all of its locations.
- B. Recommend that the customer install additional data circuits between all of its locations to accommodate the new VoWIP traffic.
- C. Use the excess capacity of the inter-site data links for voice over IP traffic.
- D. Use the existing TDM trunking with their carrier to eliminate network congestion on the data links with the addition of IP telephones.
Correct Answer: C 🗳️
A deployment is using distributed access points (APs). What needs to be available on the subnet the AP is connected to?
- A. The WSS in the subnet must have a port configured as an AP access port.
- B. A physical port number needs to be assigned on the WSS on the subnet.
- C. MAC authentication services must be made available on the subnet.
- D. DHCP services must be made available on the subnet.
Correct Answer: C 🗳️
A customer wants to implement mesh services on their WLAN 2300 series network. They currently have two buildings that will need network access using mesh services. They are concerned about expandability of the system for a new building in the future. How many mesh points can be supported by a single mesh portal?
- A. 2
- B. 4
- C. 16
- D. 8
Correct Answer: B 🗳️
Viewing page 1 out of 12 pages.
Viewing questions 1-5 out of 60 questions.
Rita 
Bertram 
Blithe 
Kimberley 
Maxine 
Marcus 
Jill 
Wallis 
Evangeline 
Clare 
Roy 
Solomon 
Hilary 
Doreen 
Matt 
Hyman 
Maxwell 
