Download Online VALID 300-715 Exam Dumps File Instantly[Jul 24, 2024]
300-715 Exam Dumps For Certification Exam Preparation
More about 300-715 Evaluation
The Cisco 300-715 test is categorized among other concentration tests where you only have to pass one. You select and take it after clearing the core exam called 350-701. With exam 300-715, each candidate has 1.5 hours to comprehensively answer all the questions presented to him or her. Listed below are the exam domains:
- Architecture & deployment;
- Endpoint compliance;
- Profiler;
- Web authentication & guest services;
Please note, other topics might be covered in the final exam but the above-listed are the commonly tested areas. If you intend to sit for 300-715 exam, enroll in the ‘Implementing and Configuring Cisco ISE’ course to help you prepare. Study guides also make great sources of information about the real test.
Cisco 300-715 exam is a 90-minute test that consists of 60-70 questions. 300-715 exam measures the candidate’s knowledge and skills in configuring and implementing advanced authentication and authorization policies, integrating Cisco ISE with other security solutions, and implementing secure guest access solutions. 300-715 exam also covers topics such as endpoint compliance, posture assessment, and network access device administration.
NEW QUESTION # 34
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. ip device tracking
- B. dot1x system-auth-control
- C. aaa authorization auth-proxy default group radius
- D. radius-server attribute 8 include-in-access-req
- E. radius server vsa sand authentication
Answer: D,E
NEW QUESTION # 35
Which compliance status is set when a matching posture policy has been defined for that endpomt. but all the mandatory requirements during posture assessment are not met?
- A. untrusted
- B. unknown
- C. non-compliant
- D. unauthorized
Answer: C
NEW QUESTION # 36
Select and Place
Answer:
Explanation:
NEW QUESTION # 37
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Explanation
Monitoring= provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service= provides network access, posture, guest access, client provisioning, and profiling services.
This persona evaluates the policies and makes all the decisions.
Administration= manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid= shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide
NEW QUESTION # 38
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. SNMP query probe
- B. DNS probe
- C. RADIUS probe
- D. NetFlow probe
- E. DHCP SPAN probe
Answer: A,C
NEW QUESTION # 39
Which term refers to an endpoint agent that tries to join an 802 1X-enabled network?
- A. EAP server
- B. authenticator
- C. supplicant
- D. client
Answer: C
Explanation:
Explanation
https://www.oreilly.com/library/view/cisco-ise-for/9780133103632/ch16.html#:~:text=What%20is%20a%2
&text=The%20802.1X%20transactions%20are,Identity%20Services%20Engine%20(ISE).
NEW QUESTION # 40
A Cisco ISE server sends a CoA to a NAD after a user logs in successfully using CWA Which action does the CoA perform?
- A. It terminates the client session
- B. It applies the downloadable ACL provided in the CoA
- C. It triggers the NAD to reauthenticate the client
- D. It applies new permissions provided in the CoA to the client session.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/113362-config-web-auth-ise-00.ht
NEW QUESTION # 41
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. ip device tracking
- B. dot1x system-auth-control
- C. aaa authorization auth-proxy default group radius
- D. radius-server attribute 8 include-in-access-req
- E. radius server vsa sand authentication
Answer: D,E
NEW QUESTION # 42
What occurs when a Cisco ISE distributed deployment has two nodes and the secondary node is deregistered?
- A. The primary node becomes standalone
- B. The primary node restarts
- C. Both nodes restart.
- D. The secondary node restarts.
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-1-1/installation_guide/ise_install_guide/ise_deploy.html if your deployment has two nodes and you deregister the secondary node, both nodes in this primary-secondary pair are restarted. (The former primary and secondary nodes become standalone.)
NEW QUESTION # 43
An engineer is testing Cisco ISE policies in a lab environment with no support for a deployment server. In order to push supplicant profiles to the workstations for testing, firewall ports will need to be opened. From which Cisco ISE persona should this traffic be originating?
- A. monitoring
- B. administration
- C. policy service
- D. authentication
Answer: D
NEW QUESTION # 44
Drag the descriptions on the left onto the components of 802.1X on the right.
Answer:
Explanation:
NEW QUESTION # 45
A network engineer is configuring guest access and notices that when a guest user registers a second device for access, the first device loses access What must be done to ensure that both devices for a particular user are able to access the guest network simultaneously?
- A. Configure the sponsor group to increase the number of logins.
- B. Modify the guest type to increase the number of maximum devices
- C. Create an Adaptive Network Control policy to increase the number of devices
- D. Use a custom portal to increase the number of logins
Answer: B
Explanation:
Explanation
https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/security/ise/2-7/admin_guide
NEW QUESTION # 46
What occurs when a Cisco ISE distributed deployment has two nodes and the secondary node is deregistered?
- A. The primary node becomes standalone
- B. The primary node restarts
- C. Both nodes restart.
- D. The secondary node restarts.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-1-1/installation_guide/ise_install_guide/ise_deploy.html if your deployment has two nodes and you deregister the secondary node, both nodes in this primary-secondary pair are restarted. (The former primary and secondary nodes become standalone.)
NEW QUESTION # 47
Refer to the exhibit Which component must be configured to apply the SGACL?
- A. ingress router
- B. secure server
- C. host
- D. egress router
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/trustsec/configuration/guide/trustsec/arch_over.html#52796
NEW QUESTION # 48
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION # 49
Which two fields are available when creating an endpoint on the context visibility page of Cisco ISE? (Choose two.)
- A. Endpoint Family
- B. IP Address
- C. Policy Assignment
- D. Security Group Tag
- E. Identity Group Assignment
Answer: C,E
Explanation:
Section: Policy Enforcement
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/ b_ise_admin_guide_22_chapter_010101.html
NEW QUESTION # 50
Which personas can a Cisco ISE node assume?
- A. administration, monitoring, and gatekeeping
- B. administration, policy service, and monitoring
- C. administration, policy service, gatekeeping
- D. policy service, gatekeeping, and monitoring
Answer: B
Explanation:
Section: Architecture and Deployment
Explanation/Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html
NEW QUESTION # 51
......
Cisco 300-715 certification exam is designed for IT professionals seeking to validate their knowledge and skills in implementing and configuring Cisco Identity Services Engine (ISE). 300-715 exam is ideal for network engineers, security administrators, and anyone responsible for managing network security policies and access control. Implementing and Configuring Cisco Identity Services Engine certification exam aims to assess the candidate's ability to deploy Cisco ISE and integrate it with other network devices and applications.
Latest Verified & Correct 300-715 Questions: https://passtorrent.testvalid.com/300-715-valid-exam-test.html